XT9 Technical data
Part. no 12-1350.
Laser detector XT9 can be used to measure Straightness, Bore Center and Values.
-
On/Off. -
Bluetooth connection.
-
Battery and charge indicator.
-
Detector PSD.
NOTE! This device is a part of a measuring system and the intended use for the device is industrial measuring together with other Easy-Laser products, according to the instructions in this manual. The device is intended for professional use only. Neither Easy-Laser nor its authorized distri
SERVICE AND SUPPORT
If the unit is damaged it has to be sent for repair. Contact your local service center as found on www.easylaser.com.
| Communication | BT Wireless technology |
| Connections | Charger |
| Type of battery | Li-Ion chargeable |
| Operating time | Up to 15 hours continuous use |
| Operating temperature | -10–50 °C [14–122 °F] |
| Charging temperature (battery) | 0–40 °C [32–104 °F] |
| Storage temperature | -20–50 °C [-4–122 °F] |
| Relative humidity | 10–95% non condensing |
| Housing materials | Aluminum, PC/ABS |
| Dimensions | 99.9 x Ø44 mm [3.933” x Ø1.732"] |
| Detector size | 20x20 mm, 2 axis |
| Minimum measurable diameter | 80 mm [3.15”] (se NOTE! below) |
| PSD accuracy at room temperature | ±0.001 mm ±1% |
| PSD resolution | 0.001 mm |
| PSD linearization | Scale factor, offset and nonlinear compensation |
| PSD parallelism compensation | Electrical |
| Inclinometer accuracy | ±1° |
| Inclinometer resolution | 0.1° |
| Inclinometer range | 360° |
| Inclinometer linearization | 7 parameters; model using A,B,C,D,E,F and offset. |
| Weight | 194 g [6.8 oz] |
| Altitude | 0-3000 m during storage/transport |
| 0-2000 m during operation |
NOTE! When using the XT9 detector in long tubes with small diameters (<80 mm, 3.15"] wireless communication
can be affected. Always consult your distributor before purchase. For normal bore alignment applications there is no problem.
Switch batteries
If batteries need to be switched, contact your local service center.
Only use batteries provided by Easy-Laser.