Overview Cardan
The Cardan program is used for alignment of cardan-shaft-coupled/centeroffset
machines.
Measuring units that can be used: XT50, XT60 and XT70.
Measuring methods
|
EasyTurn™ The EasyTurn™ function allows you to begin the measurement process from anywhere on the turn. You can turn the shaft to any three positions with as little as 20° between each position to register the measurement values. An easier-to-use version of the 9–12–3 method. |
|
9-12-3 Measurement points are recorded at fixed points 9, 12 and 3 o’clock. This is the classic three-point method which can be used in most cases. |
|
Multipoint Multipoint is basically the same as EasyTurn™, but instead you can record multiple points on the sector rotated. This will provide an optimized calculation basis. Perfect for e.g. turbine and sliding bearing applications. |
Workflow Cardan
The workflow on the top of the screen will guide you through your work. The current view is marked yellow. The report is constantly being filled out while the session is carried out. To see the report at its current state tap 
in the workflow. The measurement is saved automatically through the entire workflow.
When you have finished the measurement, tap 
and 
to finalize it.
Prepare view is active in the workflow
Create a template
- Tap and
. - Enter a new name or keep the default name. The template is saved in the File manager.