D22 Technical data

Part. no 12-0022

Laser transmitter D22 can be used to measure flatness, straightness, squareness and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130'] in radius. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [2 arc sec.].

  1. Rotatable head with angular prism.

  2. Tilting screw.

  3. Tilting table.

  4. The release lever has to be removed before the D22 can be mounted on a tripod.

NOTE! This device is a part of a measuring system and the intended use for the device is industrial measuring together with other Easy-Laser products, according to the instructions in this manual. The device is intended for professional use only. Neither Easy-Laser nor its authorized distributors shall be liable for damage to machinery or systems caused by improper use of this device.

NOTE! The tilting screws on the levelling table have to be operated carefully and according to instructions. Go to Laser transmitter D22

NOTE! If not using the laser for a long period of time, remove the battery.

SERVICE AND SUPPORT

If the unit is damaged it has to be sent for repair. Contact your local service center as found on www.easylaser.com.

 

Type of laser Diode laser
Laser wavelength 630–680 nm, visible red light
Laser safety class Class 2
Laser output power <0.6 mW
Beam diameter 6 mm [1/4''] at aperture
Working area, range 40-metre radius [130']
Type of battery 1 x R14 (C) 1.5V, replaceable by user. Professional alkaline batteries recommended.
Operating temperature 0–50° C
Operating time/battery appro. 24 hours
Levelling range ± 30 mm/m [± 1.7°]
3 x spirit vials’ scaling 0.02 mm/m
Squareness between laser beams 0.01 mm/m [2 arc sec.]
Flatness of sweep 0.02 mm/m
Fine turning 0.1 mm/m [20 arc sec.]
2 x spirit vials for rotation 5 mm/m
Housing material Aluminium
Dimensions WxHxD: 139x169x139 mm [5.47''x6.64''x5.47'']
Weight 2650 g [5.8 lbs]
Operating temperature 0–50° C
Altitude 0-2000 m
Designed for outdoor use (pollution degree 4)

 

Labels with laser safety precautions

Label on the front of D22