Know your machine from every angle

Powerful functions in XT770

With the new, dual-axis measurement units and the EasyTrend software, you can register dynamic movements caused by e.g. thermal expansion, pipe forces, movements in foundations, etc.

As with other XT systems, you can align horizontal and vertical/flange-mounted machines, but now you can also align machine trains. 

The 360Live function allows you to align the machine using the measurement units positioned at any angle around the shaft. This is useful when it is difficult to rotate the shaft, or when machine components are in the way. Of course, there is the Soft Foot program, which now also offers the potential to check both machines at the coupling.

A flat foundation is the basis for a reliable machine set-up. You can check this using our unique Twist program and the two included measurement units. In other words, you don’t need a separate laser transmitter. However, to make use of the measurement system’s full potential, you can use our geometric laser transmitter D22 (accessory) to achieve maximum precision and reliability when measuring with the Values program. Overall, the XT770 provides you with more opportunities than ever to check and adjust your machines, from every point of view!

The Easy-Laser XT Alignment app

The basis of all Generation XT systems is the shared, free app, which guides you through the measurements with a clear and intuitive interface. Run the app on your own smartphone or tablet, or on our robust, IP67-rated XT11. Or both!

Updated app, version 5.0

If you have an XT550 or XT660, the updated app (ver. 5.0) will provide you with access to the Machine train program (limited to 3 machines for the XT660) and the Twist program.

The Soft Foot program, which works with all XT systems, now also provides the opportunity to check both machines at the coupling.

See the XT770 film!

Find out more about XT770! 

Try out the app! Google Play / App Store

Update your XT11!