Easy-Laser® E930 - Extruder

Measurement system for alignment of extrusion machines

Easy-Laser® E930 Extruder is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application can be hydraulic pipes for example. 

An aligned extrusion machine leads to:

  • Less wear on the extruder screw and tube. 
  • Even quality on the produced material.
  • Increased machine availability.

With the Easy-Laser® E930 system, pipes with diameters down to 50 mm can be measured, at a range of up to 40 m. The transmitter's laser beam can be compared to an absolutely straight and weightless ruler, that is to say a perfect starting point for precision measurement.

During the alignment procedure both detector and spindle are rotated, thus self calibrating the system. This way you can determine how the centre line of the spindle is, relative to the tube’s centre at the inlet end.

Document your measurement results

The detector's measurement value is transferred to the display unit wirelessly, which means that one can measure more freely. The measurement system has programs that guide you step-by-step, using clear graphics on a large 5.7" colour screen. You can also produce full documentation for your measurement job, with direct generation of PDF reports, and database programs for PC for example.

Many reasons for alignment

The gearbox shaft centre must coincide with the centre line of the extruder tube. Otherwise the screw at the inlet’s end will be pressed against the tube, which will lead to abnormal wear of both screw and tube along with increased energy consumption. This wear can also result in metal fragments in the produced material. It is important that the extruder tube is straight so that the screw does not rest against the tube in any part, which can result in abnormal wear and fragments of metal in produced material. We will also get a more even temperature of produced material which in the end results in a better product.

Complete system with all the measuring programs

Easy-Laser® E930 is a complete system in itself, with laser transmitter, detector and display unit. You can also add other parts from our extensive range to build a system that suits your specific needs and requirements, because all the measurement programs are included as standard. For example add shaft alignment equipment for other rotating machines, and lasers for flatness measurement.

[MÄTPROGRAM]

The featured programs below are the most common used with this system. Please click here for a complete overview of possibilities.
*=accessories needed

Centre-of-circle, Straightness 2-point

Used for straightness measurement of bearing journals when the bore diameter varies. For example, diesel engines, propeller shaft installations, etc. With advanced "best-fit" calculations.

Straightness measurement

With our program for measuring straightness, you can easily measure long shafts, rolls, bearings, bases, machine structures etc. All you have to do is define a number of measuring points, in advance or while measuring. You will be able to get the result for both the horizontal and vertical alignment, graphically as well as digitally. 

Half circle, Straightness 3-point

Readings taken in three positions: 9, 6 and 3. Allows varying diameters. To be used together with the turbine system. With advanced "best-fit" calculations.

Straightness, 4-point

Used for straightness measurement of bearing journals. Measures two points in each direction, X and Y. Can handle up to 999 measurement points with two zero points. With advanced "best-fit" calculations.

Straightness, Multipoint

Used for straightness measurement of bearing journals. The number of measurement positions are theoretically unlimited for each measurement point. Can handle up to 999 measurement points with two zero points. With advanced "best-fit" calculations.

Ovality/roundness

For ovality measurements of bore and bearing journals. The number of measurement positions are theoretically unlimited for each bore.

[SMARTA FUNKTIONER]

Measurement value filter
Templates
Multiple languages

[DOCUMENTATION]

EasyLink™ PC software
Save to USB memory
Save to built-in memory
Create a PDF report
Make a printout

Display unit E51

The display unit for the E series enables you to work more efficiently and for longer than ever before thanks to several innovative solutions. It is also ergonomically designed with easy-to-grip rubber cladding and robust construction.

Ergonomic design

The display unit has a thin, easy-to-grip and rubber coated profile that ensures a secure grip. It has large well-spaced buttons that give clear feedback when pushed. In addition, the two Enter buttons make the system suitable for both right and left-handed users. The display screen has clear graphics that guide you through the measurement process.

Personal settings

You can create a user profile where you can save your personal settings. You can also have different settings for different types of measurements. It makes work faster!

Language selection

You can choose the language that you want to appear on screen. English, German, French, Spanish, Portuguese, Swedish, Finnish, Russian, Polish, Dutch, Italian, Japanese, Korean and Chinese are available. 

Upgrading

If you wish to expand functionality in the future, the software in the display unit can be upgraded via the internet or by connecting a USB memory containing the new software. In this way you will also have access to the measurement programmes that we develop for new purposes in the future.

  1. Two Enter buttons, for left and right-handed users
  2. Large, easy to read 5.7” colour display
  3. Proper buttons for clear feedback
  4. Thin profile gives a perfect grip for your hands
  1. Mounting for shoulder strap
  2. Connection for charger
  3. USB A
  4. USB B
  5. Easy-Laser® measurement equipment
  6. Robust, rubber coated design

Note: Dust and splash guards for connectors that are not used when measuring

Detector E9 with extruder brackets

Detector diameter 45 mm [1.77"]. 2 axis PSD, 20x20 mm  [0.79"x0.79"]. Built-in 360° electronic inclinometer. Built-in Bluetooth® wireless communication and rechargeable battery. There is also a connector on the back side for standard "red cable" (charging and data transfer). Mounting threads on both ends, for tube adapters (01-0777) or other suitable brackets (e.g. 12-0767 and 12-0553).

  1. Tube adaptors for detector. Manufactured to order to fit the actual diameter.
  2. Detector E9
  3. Mounting for extension rods.

D75 Laser transmitter

Laser transmitter for straightness measurement. Measurement distance 40 m [130']. M6 threads on ends and sides offer alternative mounting options. With the magnet bracket pictured, the laser beam can be pointed from the bracket or through the bracket. Three super magnets holds the transmitter in a perfect position.

  1. Laser adjustment screws
  2. Super magnets

A COMPLETE SYSTEM CONTAINS

  • 1 Display unit E51
  • 1 Laser transmitter D75
  • 1 Detector E9
  • 1 Cable 2 m
  • 1 Cable 5 m, extension
  • 1 Bracket for D75 with magnets
  • 1 Set of brackets for detector
  • 1 Set of extension rods for detector
  • 1 Target for extruder 
  • 1 Manual
  • 1 Measuring tape 5 m
  • 1 USB memory stick with EasyLink™ software
  • 1 USB cable
  • 1 Battery charger (100–240 V AC)
  • 1 Hexagon wrench set
  • 1 Shoulder strap for Display unit
  • 1 Cleaning cloth for optics
  • 1 Carrying case

Display_Unit

Name
E51
Part No.
12-0418
Type of display/size
VGA 5.7” colour screen, backlit LED
Displayed resolution
0.001 mm / 0.05 thou
Internal battery (fixed)
Heavy duty Li Ion chargeable
Battery compartment
For 4 x R14 (C)
Connections
USB A, USB B, Easy-Laser® units, Charger
Operating temperature
-10–50 °C
Wireless communication
BT wireless technology
Internal memory
>100 000 measurements can be saved
Help functions
Calculator, Unit converter
Environmental protection
IP class 65
Housing material
PC/ABS + TPE
Dimensions
WxHxD: 250x175x63 mm [9.8”x6.9”x2.5”]
Weight (without batteries)
1080 g [2.4 lbs]

Laser_Transmitter

Name
D75
Part No.
12-0075
Type of laser
Diode laser
Laser wavelength
630–680 nm, visible red light
Laser Safety Class
Class 2
Adjustable modulation
5, 32 KH
Output
< 1 mW
Beam diameter
6 mm [1/4"] at aperture
Working area, range
40 m [130']
Type of battery
1 x R14 (C)
Operating time/battery
approx. 15 h
Laser adjustment
D75: 2 ways ±2° (± 35 mm/m)
Housing material
Anodized aluminium
Dimensions
WxHxD: 60x60x120 mm [2.36x2.36x4.72"]
Weight
780 g [27.5 oz]

Detectors

Name
E9
Part No.
12-0759
Wireless communication
BT wireless technology or cable
Type of detector
2 axis PSD 20x20 mm [0.78" sq]
Dual Detection Technology™
N/A
Type of display
N/A
Resolution
0.001 mm [0.05 mils]
Measurement error
±1µm ±1%
Inclinometers
0.1° resolution
Thermal sensor
± 1° C accuracy
Environmental protection
IP class 67
Internal battery
Li Ion
Operating temperature
-10–50 °C
Protection
No influence from ambient light
Housing material
Anodized aluminium, Plastics
Dimensions
Diameter 45 mm [1.77"], length 100 mm [3.94"]
Weight
180 g [6.3 oz]

Manuals

E9xx Geometric Manual
Extruder Guide

Brochures

Product Catalogue rev. 23
Product Overview
E930 Extruder

For software, see Support > Software download.

E930 - Extruder

Easy-Laser® E930 is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application can be e.g. hydraulic pipes. 

XT980 - Sawmill

The Easy-Laser® XT980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Equally useful on band saws and circular saws.

E950 - Bore alignment

Easy-Laser® E950 makes checking and aligning bearings and bearing journals easy. All of the parts included in the systems are designed and built for even the most demanding workplace and for easy setup on any machinery.

E960 - Turbine alignment

Easy-Laser® E960 Turbine alignment systems make the measurement and adjustment work of diapraghms and bearings easier thanks to the wireless detector unit and measurement programs that guides you through the measurement process.

E970 - Parallelism

For parallelism measurement of rolls and other objects in numerous applications. The Easy-Laser® E970 is especially suitable when many objects are to be measured and aligned, and when the distances are long. 

E980 - Sawmill

The Easy-Laser® E980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Equally useful on band saws and circular saws.

E910 - Flange

Easy-Laser® E910 Flange is a system used to measure flange flatness of windmill towers, wings and hubs, tower bases, etc. It can also be used for parallelism measurement.

E915 - Flange spin

Easy-Laser® E915 is a system used to measure flange flatness of windmill towers and slewing bearings with an easy-to-use rotating laser. 

E920 - Geometric

Easy-Laser® E920 can be used to carry out all the most common geometric measurements; straightness, flatness, squareness, plumb and level. Measurement is quick and precise.