Easy-Laser® XT440 - Shaft alignment
Easy-Laser® XT440 Shaft is a member of our Generation XT alignment systems, built upon our cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT12. With XT440 you can carry out the following:
With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process.
Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.
The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs.
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.
* Click here for list of compatible devices
If you don't have access to Google Play:
XT Alignment app for Android
The featured programs below are the most common used with this system. Please click here for a complete overview of possibilities.
*=accessories needed
Measurement points are recorded at fixed points 9, 12 and 3 o’clock. This is the classic three-point method which can be used in most cases. The preferred method for situations where the machine to be aligned is mounted on a moving object, and it is not possible to use the inclinometers (e.g., on ships, cranes, wind turbines etc.).
Ideal method for coupled machines where you manually rotate the shafts to any position. The EasyTurn™ function allows you to begin the measurement process from anywhere on the turn. You can turn the shaft to any three positions with as little as 20° between each position to register the measurement values. An easier-to-use version of the three-point method (see 9–12–3).
The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process.
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).
Optional:
This video goes through the XT Horizontal Shaft Alignment program using the XT440 and XT770 measuring units.
(This video was produced by our Canadian partner Benchmark PDM.)
For software, see Support > Software download.
Shaft alignment systems specially developed for alignment of wind turbines.
With Easy-Laser® XT660 you can deal with all the important steps of machine setup and maintenance.
With Easy-Laser® XT770 you can perform shaft alignment of horizontal and vertically/flange mounted machines, but also align machine trains, measure twist of foundation, and more.
Easy-Laser® XT550 is an intrinsically safe shaft alignment system, developed for use in potentially hazardous areas.
Easy-Laser® XT440 is our most basic, app based system. Lets you perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines.
