Easy-Laser® XT190 - Belt alignment
When aligning with the Easy-Laser® XT190 BTA you reduce the wear on sheaves/pulleys, belts, bearings and seals, and you also get lower noise and vibration levels. The accuracy of the digital readout means that you can align within prescribed tolerances and rely on the result. Especially transmissions with two or more belts, or wide belts, are highly affected by misalignment, causing large differences in belt tensions and also increased wear and tear on edges.
The Easy-Laser® XT190 allows even more accurate and efficient alignment of sheaves/pulleys, and is unique to the market in being able to offer digital read off.
The transmitter generates a laser plane parallel to the reference sheave. The detector reads the position in relation to the laser plane and provides a live digital display of both offset and angular value. This makes the alignment of the adjustable machine very simple. The accuracy of the digital readout also means that you can align within prescribed tolerances and rely on the result.
Follow the adjustment on the integrated OLED display, in the free XT Alignment app on your phone or tablet, or on a separate Easy-Laser display unit*. The machine's shim and adjustment values are automatically calculated. It is also possible to read off visually on targets (included).
With the XT display unit or mobile device, it is easy to save the data and create a PDF report.
Compared with old methods such as rulers, the alignment is more accurate and efficient when both horizontal and vertical adjustment is carried out at the same time. In addition, the work can be performed by one person alone, in a significantly shorter time.
The XT190 is mounted on the sheave/pulley using super magnets. It can be used on all types of sheaves/pulleys, such as v-belt, timing belt, flat belt and chain drives. If you have aluminum sheaves/pulleys, the low weight of the tool means that it can be attached using strong double-sided tape.
* Can be used with E or XT series display units (not included). For list of compatible iOS and Android units, please click here.
If you don't have access to Google Play:
XT Alignment app for Android5 read-out options!
This video goes through the XT Belt Alignment program using the XT190 BTA.
(This video was produced by our Canadian partner Benchmark PDM.)
This animation guides you through the 5 steps of belt transmission alignment.
For software, see Support > Software download.
Easy-Laser® D92 is installed in a few seconds, and the laser line that is projected on the targets clearly shows how to adjust the machines.
Easy-Laser® XT190 BTA allows accurate and efficient alignment of sheaves/pulleys, and is unique to the market in being able to offer digital read off.
