Easy-Laser® XT290 - Digital precision level
A reliable machine installation is achieved when the foundations are correctly dimensioned and installed, and machines correctly aligned. Among other things, a measurement instrument for leveling is needed for this. Easy-Laser® XT290 Digital precision level is therefore the obvious complement to your shaft alignment system!
The Easy-Laser® XT290 digital precision level allows you to level your machines easily and reliably. Accuracy is guaranteed by the precision-ground, hardened steel base and precise electronics, and the simplicity by quick stabilization and connection to our XT Alignment App.
In principle, all machines must be level (or plumb) to work as intended. Generally speaking machines are required to be set-up to within 0.1 mm/m. The reason is simple; machines must be affected by gravity symmetrically. Forces on bearings and other machine elements are calculated based on these conditions. Lubrication can also be dependent on this. If the machine is not set-up correctly from the start, the intended availability and longevity may not be achieved.
Easy-Laser XT290 digital precision level has been developed for demanding users and environments:
You can wirelessly connect XT290 to the XT Alignment app on your own smartphone/tablet or XT display unit, and use these as separate display units. You can readout and follow the adjustment continuously from where you make adjustments to the machine, instead of having to move back and forth repeatedly. It makes the job easier. This also allows you to place the precision level inside any safety cage, and take readouts outside with the machine running.
The free app gives you access to even more great functions. For example you can register and record changes during operation (dynamic measurement). You set a time period and frequency. Another function is the ability to connect up to four devices simultaneously (precision level and/or measuring units for shaft alignment) and follow their movements and measurement values. In these ways, you can gain an unsurpassed understanding of how your machine is affected during operation, and find sources of problems more easily.
The app allows you to create PDF reports containing measurement data, images and notes. This type of documentation is usually requested by the client. Continuous documentation of measurements provides a good basis for analyzing and comparing machine status over time.
The XT290 digital precision level has an accuracy of 0.02 mm/m and angle change sensitivity of 0.001 mm/m. Extremely fast updating of the measurement values makes the digital precision spirit level easy to use. The software indicates whether temperature changes or disturbing vibrations can affect the reliability of the measurement results. In addition, the XT290 has inclinometers for two directions. These are used outside the precision measurement range so that you can still adjust the object, but with less accuracy. See technical data for more information.
If you don't have access to Google Play:
XT Alignment app for Android
A useful tool for setting-up and aligning most types of machine, for example, levelling machine bases, rolls, tables, etc.
* Safety strap is accessory. (Safety regulations differ from country to country.)
The Easy-Laser® E980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Equally useful on band saws and circular saws.
The Easy-Laser® XT980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Equally useful on band saws and circular saws.
Easy-Laser® E910 Flange is a system used to measure flange flatness of windmill towers, wings and hubs, tower bases, etc. It can also be used for parallelism measurement.
Easy-Laser® E915 is a system used to measure flange flatness of windmill towers and slewing bearings with an easy-to-use rotating laser.
Easy-Laser® E920 can be used to carry out all the most common geometric measurements; straightness, flatness, squareness, plumb and level. Measurement is quick and precise.
Easy-Laser® E930 is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application can be e.g. hydraulic pipes.
Easy-Laser® E950 makes checking and aligning bearings and bearing journals easy. All of the parts included in the systems are designed and built for even the most demanding workplace and for easy setup on any machinery.
The Easy-Laser® XT950 Bore Alignment System is used for the precise alignment of bore center lines, bearing journals, and cylindrical objects.
Easy-Laser® E960 Turbine alignment systems make the measurement and adjustment work of diapraghms and bearings easier thanks to the wireless detector unit and measurement programs that guides you through the measurement process.
For parallelism measurement of rolls and other objects in numerous applications. The Easy-Laser® E970 is especially suitable when many objects are to be measured and aligned, and when the distances are long.
