Service Centers world-wide

Our very competent Service Centers will assist you quickly if an incident should occur and you need your measurement system repaired, or when it is time for calibration. Fast service is something we really emphasize because we know that each hour that your machines are down costs money. You can count on us when it really matters. 
 
For shaft alignment systems, we can offer a 48 hour express service at an additional cost (Time from when we receive the measurement system to when it leaves us. NB: currently only applies to the Easy-Laser Service Center in Sweden).
 
Important! Easy-Laser AB in Sweden is the main Service Center for all types of repair, although there are local service centres with limitations. Therefore, always contact your local Service Center, as indicated below, before sending your measurement system for service or calibration. Also make sure your system is updated with the latest software version before sending it for service.

All Service Centers

Service Center Sweden
Note! It is mandatory to fill out the service form before sending any system for service to Easy-Laser Service Center Sweden.
Service Form
Easy-Laser AB
Alfagatan 6
Mölndal , 431 49
Sweden
Service Center Australia
GVS Reliability Products
Att. Service Manager
Unit 1 / 10 Seasands Drive
Redhead, NSW 2290,
Australia
Service Center Brazil
EasyVector Service
Att. Murilo Medeiros
Rua Lourenço Dias, 640 – Sala 05
Centro – Araras/SP, 13.660-180
Brazil
Service Center Canada
For service, contact Service center Sweden (Easy-Laser AB).
For calibration, contact:
BENCHMARK PDM, Inc.
Att. John-Paul Lambert
1845 Sandstone Manor, Unit 14
Pickering, Ontario L1W 3X9,
Canada
Service Center China
Vantech Beijing Service centre
Att. LuoMing
Room A509, NanXinCang Business tower, No 22
DongSiShiTiao Street, DongCheng District
Beijing, 100007
China
Service Center Germany
For service, contact Service center Sweden (Easy-Laser AB).
For calibration, contact:
Easy-Laser GmbH
Att. Gerrit Mohr
Industriering Ost 66
Kempen, 47906,
Germany
Service Center France
dB Vib Consulting
Att. Régine Drevet
Montée de Malissol
Vienne, 38200
France
Service Center India
M/s TechServices
Att. Mr Suresh Gupta
718, 7th Floor, Swastik Chambers,
CST Road, Chembur East
Mumbai, 400 071
India
Service Center Netherlands
SPM Instrument B.V.
Att. Ben van Sambeek
Thomas Edisonweg 10
DJ DRUNEN, 5151
Netherlands
Service Center Peru
Ademinsac
Att. Alvaro Reyna
Calle Cerro Azúl N. 479
Surco-Lima , 33
Peru
Service Center Singapore
Vibro Technologies & Engineering Pte Ltd
Att. Nick Kang
60 Ubi Crescent #01-05
Ubi Techpark
Singapore, 408569
Singapore
Service Center South Africa
For service, contact Service center Sweden (Easy-Laser AB).
For calibration, contact:
Engineering Dynamics Pty Ltd.
Att. Marko Kleynhans
975 Waterpoort Street
Faerie Glen Extension 24
Pretoria,
South Africa
Service Center Türkiye
PEAK Teknik Mühendislik Ltd
Att. Ozan Onur OKUMUŞ
Güneştepe Mah. 228. Sok. No:4 A Blok Kapı:1
Osmangazi/Bursa, 16165
Türkiye
Service Center United Kingdom
For service, contact Service center Sweden (Easy-Laser AB).
For calibration, contact:
Easy-Laser UK
Att. Sam Pearce
Unit C3 – Bay 1, Scholefield Mill
Brunswick Street
Nelson, BB9 0HU
United Kingdom
Service Center United Arab Emirates
Franal Alignment & Automation FZE
Att. Aneesh Francis
Sharjah Airport Free Zone
PO Box 8749
Sharjah,
United Arab Emirates
Service Center USA
Ludeca, Inc.
Att. Jens Heilemann
1425 NW 88th Avenue
Doral, FL 33172,
USA