Accessories for geometric measurement systems

Here you find a selection of accessories available for our range of geometric measurement systems. For a complete overview, please see the product catalogue.

Shows for

Bracketing

Extension Kit for E290 for large diameters
Part No.: 12-0901
System: E
Description:
For using the E290 Precision Level on diameters 55–800 mm [2.16–31.50 “].
Large roll kit
Part No.: 12-0885
System: E
Description:
Accessories for roll diameter 400–1300 mm [15.7–51.2”].
Magnet base
Part No.: 12-0013
System: D,E,XT
Description:
Versatile magnet base with On/Off function and many optional rod mounting possibilities. For use with XT-series offset bracket 12-1008 is also needed.
Magnet base with turnable head
Part No.: 12-0045
System: D,E
Description:
Versatile magnet base with On/Off function and 360° turnable head with two rod mounting possibilities.
Magnet base with turnable head
Part No.: 12-1133
System: D,E,XT
Description:
Versatile magnet base with On/Off function and 360° turnable head with two rod mounting possibilities, for both C–C40 mm and C–C56 mm. It has a screw and washer with which you can lock the top rotation, and therefore still use it for jobs like shaft alignment.
Mounting pin for D146
Part No.: 12-0568
System: D,E
Description:
Accessory mounting pin for laser transmitter D146. Makes it possible to point the laser beam into e.g. the chuck. Clamping Ø20 mm [0.79”].
Rod adapter with built in target
Part No.: 12-0767
System: E
Description:
For detector E8/E9. With slidable target. For mounting of the detector on regular rods with 40 mm centre-to-centre distance. Can be used on Slide bracket 12-0768 or any other suitable bracket.
Rods, 120 mm [4.72"]
Part No.: 12-0324
System: D,E,XT
Description:
Stainless steel. Diameter 10 mm. Extendable. Plastic holder included.
Rods, 240 mm [9.44"]
Part No.: 12-0060
System: D,E,XT
Description:
Stainless steel. Diameter 10 mm. Extendable. Plastic holder included.
Rods, 60 mm [2.36"]
Part No.: 12-0059
System: D,E
Description:
Stainless steel. Diameter 10 mm. Extendable. Plastic holder included.
Rods, 75 mm [2.95"]
Part No.: 12-1161
System: D,E,XT
Description:
Stainless steel. Diameter 10 mm. Extendable. Plastic holder included.
Self centering bracket, Linebore
Part No.: 12-0341
System: D,E
Description:
For sterntube measurement. Smallest diameter 300 mm [11.81”]. Includes extension beams and rods for diameters up to 1200 mm [47.24”].
Slide bracket min. Ø120 mm [4.72"]
Part No.: 12-0455
System: D,E
Description:
For bore straightness measurement. With magnetic feet. For bores Ø120–250 mm [4.72”–9.84”].
Slide bracket min. Ø200 mm [7.87"]
Part No.: 12-0543
System: D,E
Description:
For bore straightness measurement. With magnetic feet. For bores Ø200–350 mm [7.87”–13.78”], width Min. 80 mm [3.15”].
Slide bracket min. Ø300 mm [11.81"]
Part No.: 12-0510
System: D,E
Description:
For bore straightness measurement. With magnetic feet. For bores Ø300–500 mm [11.81”–19.68”], width Min. 100 mm [3.94”].
Sliding bracket with turnable head
Part No.: 12-0137
System: D,E
Description:
For roll parallelism measurement. The spherical feet can be placed in two different positions for adaption to small or large roll diameters.
Spindle bracket for measuring unit
Part No.: 12-0787
System: E
Description:
Bracket for use with an ES-unit as laser transmitter. Clamping pin Ø 20 mm [0.79“], clamping length 40 mm [1.57“]. It is also possible to turn the measuring unit to point the laser beam through the pin. This is for example useful when aligning bar feeders.
Tilt table with magnet base
Part No.: 12-0742
System: D,E
Description:
Tilt table for use with an ES-unit as transmitter, e.g. with the Twist measurement program. This tilt table simplifies and makes the rough alignment of the laser beam quicker. Use the EM-unit as detector, mounted on a regular magnet base.

Detectors and other receivers

Detector E3
Part No.: 12-0799
System: E
Description:
Detector for the E-series. 2 axis PSD, 30x30 mm [1.18”x1.18”]. Built-in wireless communication. Battery status indicator. Built-in 360° electronic inclinometer. One connector on top side. Normally mounted on rods, but also has additional mounting threads on back side.
Detector E9, 2-axis PSD
Part No.: 12-0759
System: E
Description:
Detector diameter 45 mm [1.77“]. 2 axis PSD, 20x20 mm [0.79”x0.79”]. Built-in 360° electronic inclinometer. Built-in wireless communication and rechargeable battery. There is also a connector on the back side for standard “red cable” (charging and data transfer). Mounting threads on both ends, for tube adapters (01-0777) or other suitable brackets (e.g. 12-0767 and 12-0553).
Digital Precision Level E290, complete kit
Part No.: 12-0857
System: E
Description:
Digital precision level (12-0846), complete kit with Battery charger 100–240 V AC (03-0821), safety strap (12-0915) and USB memory stick with documentation (03-0914).
Roll alignment kit
Part No.: 12-0856
System: E
Description:
Includes roll bracket (12-0849), detector E2 (12-0845), digital level E290 (12-0846), adapter plate (12-0874), charger (03-0821), DC charging cable (12-0750), DC to USB adapter (12-0751), USB memory stick with documentation (03-0914).

Laser transmitters

Laser transmitter D146 Spindle
Part No.: 12-0146
System: D,E
Description:
For measuring spindle direction and straightness. Can be used in a rotating spindle (max. 2000 rpm). Measurement distance 20 metres [65’]. Mounting pin Ø20 mm [0.79”].
Laser transmitter D22 Swivel
Part No.: 12-0022
System: D,E,XT
Description:
Laser transmitter D22 can be used to measure flatness, straightness, squareness and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [0.01 mils/inch]. Tilt table included.
Laser transmitter D23 Spin
Part No.: 12-0168
System: D,E
Description:
Laser transmitter D23 has a motor driven, rotating head that gives a 360° laser plane. Because the laser beam sweeps across the surface you do not need to align the beam for every detector position. Tilt table included. Measurement distance up to 20 metres [65´] in radius.
Laser transmitter D25 with offset hub
Part No.: 12-0706
System: D,E
Description:
For measuring straightness primarily in turbine applications. Measurement distance 40 m [130’]. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [0.5 mils/INCH].
Laser transmitter D26 Swivel
Part No.: 12-1064
System: D,E,XT
Description:
Laser transmitter D26 can be used to measure flatness, straightness, squareness and parallelism. Mainly for use in machine tool applications. The laser beam can sweep 360° with a measurement distance of up to 30 metres [100´] in radius.
Laser transmitter D75
Part No.: 12-0075
System: D,E
Description:
For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance 40 m [130’].
Laser transmitter E30 Long Range
Part No.: 12-0823
System: D,E
Description:
For measuring straightness on long distances. Measurement distance 100 m [328’] with a 20 mm PSD, >200 m [656’] with 30 mm PSD. M6 threads on front and bottom offer alternative mounting options. Built-in rechargeable battery and Oled display.
Laser transmitter E30 Long Range, with tilt table
Part No.: 12-0858
System: D,E
Description:
For measuring straightness on long distances. Measurement distance 100 m [328’] with a 20 mm PSD, >200 m [656’] with 30 mm PSD. M6 threads on front and bottom offer alternative mounting options. Built-in rechargeable battery and Oled display.

Miscellaneous

Angular prism
Part No.: 12-1136
System: D,E
Description:
Angular prism with built-in penta prism which deflects the beam 90°. With the rotatable angular prism you can reach a detector at any height on a flange or a roll when measuring parallelity. Angular prism has a rod C–C of 40 mm. Items included: prism, bracket for detector unit, laser transmitter alignment target.
Angular prism, kit
Part No.: 12-1221
System: D,E
Description:
Angular prism kit in rugged carrying case. Includes carrying case plus items pictured: prism, bracket for detector unit, laser transmitter alignment target, magnet base, 4 pcs rods 120 mm [4.72"].
Measuring probe Ruby Ø2.5mm
Part No.: 12-0801
System: D,E
Description:
Probe for turbine measurement. With ruby top.
Measuring probe Ruby Ø5mm
Part No.: 12-0805
System: D,E
Description:
Probe for turbine measurement. With ruby top.
Parallelity kit
Part No.: 12-0203
System: D,E
Description:
For parallelism measurement of rolls. Includes Magnet base D45, Sliding bracket 12-0137, Sliding table 12-0202, 2 x Large target base line. Delivered in plastic case.
Printer for E-series
Part No.: 03-1004
System: E
Description:
Battery operated thermal printer. With USB cable and 110-220V charger. For connection to all systems with E-series display units.
Sliding table for tripod
Part No.: 12-0202
System: D,E
Description:
Sliding table to mount on a tripod. For laser transmitters and angular prism. Allows for 150 mm [5.9"] slide of the unit, for example to point the laser beam to a detector on a rod or flange without moving the tripod.
Tripod
Part No.: 12-0269
System: D,E
Description:
For use with D22 and angular prism.
Tripod adaptor for Angular prism
Part No.: 01-2232
System: D,E
Description:
To be used for mounting of Angular prism on tripod. Directly mounted, or preferably on sliding table 12-0202 as pictured.