XT20 and XT22 laser transmitters
XT20 laser transmitter in case
XT20 laser transmitter in use
XT20 and XT22 laser transmitters
XT20 laser transmitter in case
XT20 laser transmitter in use

Easy-Laser® XT20/XT22 - Laser transmitters

Flatness and level equals reliability

Machinery installed on a surface that is not flat and level faces a high risk of failure right from the beginning. With the XT laser transmitters, you satisfy the requirements for flatness and level mentioned in standards such as ISO and ANSI/ASA. This will lead to lower maintenance costs and enhance the long-term performance of your equipment.

Two models available

The two transmitters are at their core the same, but some things differ, addressing different user needs:

XT20 are for those who take flatness and straightness measurements for machine installations, and for those who check surface flatness on manufactured parts. XT20 is water and dust protected (IP55). This is the choice for maintenance and installation technicians. Excellent also for checking flange flatness. 

XT22 in addition also lets you point the laser beam perpendicular to the laser plane. A built-in vertical preci­sion level also lets you level it when mounted on its side so the laser plane sweeps vertically. XT22 provides more options for geometrical measurements, and even higher accuracy and precision thanks to fiber laser technology, among other things. With this transmitter you can literally measure anything! 

Connected reliability

The XT transmitters have wireless connection to our XT Alignment App. This means that during measurement you get warning messages about events that can affect the result negatively, for example if the transmitter position has changed, or temperature changes inside the unit. Digital read-out (in the app or in the built-in display) means accuracy will not be affected by user interpretation or possible bad ambient lighting. We can also let the app guide you step-by-step when calibrating the levels before measuring.

Electronic levels mean benefits

The benefits with electronic levels over analogue ones are many:

  • Digital readout (in the app or in the built-in display) means the accuracy will not be affected by user interpretation or possible bad ambient lighting.
  • Electronic zeroing eliminates the cumbersome work caused by manual set up and associated errors that can follow.
  • The electronic levels stabilize faster, resulting in a better user experience and quicker measurement jobs.

Versatility in every sense

Both transmitters can be used with the Straightness, Basic Flatness, and Values programs. Fact is, with the Values program you can tackle almost any type of geometrical measurements! A long lasting rechargeable battery provides an operating time of up to 30 hours. The transmitters have lots of mounting possibilities, various attachments for brackets, and repositionable attachment magnets. There’s a solution for every measurement situation.

Compatibility

You need measuring unit XT70-M as detector, which is standard with system XT770. It can also be purchased separately. If you would like to use XT20/XT22 with one of your existing Easy-Laser D- or E-series systems your will need to download the free XT Alignment App to be able to calibrate the digital levels.*

For more details, please download the product flyer you find under the tab Downloads.

 

* The design of the XT transmitters differs in many ways from previous models like for example D22. They can therefore not be exchanged straight off. Ask your local distributor before purchase.

 

Download

If you don't have access to Google Play:

XT Alignment app for Android 
(Version 8.3.4, 296MB)

XT20 and XT22 product features

XT20 Laser transmitter

Laser transmitter XT20 can be used to measure flatness and straightness. The laser beam can sweep 360° with a measurement distance of up to 20 metres [65´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw. The laser head fine turning knob makes it very easy to point the beam at the detector also on long distances (gear ratio 1:132).

We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).

The XT transmitters have wireless connection to our XT Alignment App. This means that you get warning messages during measurement about events that can affect the result negatively, for example if the transmitter position might have been affected, or temperature changes inside the unit. We can also let the app guide you step-by-step when calibrating the levels before measuring.

The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.

The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.

Learn more in the XT20/XT22 brochure.

  1. Super stable rotatable head, still easy to turn. No need for locking/unlocking screw. One aperture.
  2. Marking for every 45°. For quick rough alignment.
  3. Fine turning of laser beam head.
  4. Charger connection.
  5. Tilt adjustment (×2).
    Tilt table with large adjustment angle, ±1.3° (±23 mm/m [±23 mils/inch]).
  6. Solid aluminium core ensures rigid design.
  7. Release lever.
    Also for dampening the strong magnet force when placing the transmitter on the surface.
  8. Fastening of separate magnet bases (×2). 

 

  1. Rubberized grip surface.
  2. M6 thread (×4) for safety strap screw and other accessories/adaptations.
  3. Countersunk profile for fingers, for better grip when lifting the transmitter.
  4. Super magnets (×3).
  5. Square design makes it easy to position in a corner of an object, it also clearly indicates tilting angles and simplifies calibration.
  6. Clear TFT colour display.
    On/Off, Change display view.

XT22 Laser transmitter

Laser transmitter XT22 can be used to measure flatness, straightness, squareness, level and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw.

We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).

The laser beam can be pointed perpendicular to the flatness plane, within 0.01 mm/m [0.01 mils/inch]. XT22 has a fine turning mechanism for the laser head with a gear ratio of 1:1320, which makes it super easy to point the beam at the detector also on very long distances.

The fiber-coupled laser creates an extremely smooth laser beam profile, free from reflections and irregularities. This means that the laser beam will have very good optical properties in terms of straightness (± 0.003 mm [± 0.12 mils]).

The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.

The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.

Learn more in the XT20/XT22 brochure.

  1. Super stable rotatable head, still easy to turn. No need for locking/unlocking screw. Two apertures. 
  2. Super fine turning of laser beam head. 
    Simplifies beam positioning to detector on very long distances like the 40 m [132'] maximum. 
  3. Charger connection.
  4. Tilt adjustment (×2).
    Tilt table with large adjustment angle, ±1.3° (±23 mm/m [±23 mils/inch]).
  5. Release lever.
    Also for dampening the strong magnet force when placing the transmitter on the surface.
  6. Fastening of separate magnet bases (×2). 
  7. Flippable angular prism.
    Provides a laser beam perpendicular to the flatness plane.
  8. Solid aluminium core ensures rigid design.
  9. Marking for every 45°. 
    For quick rough alignment.

 

  1. Rubberized grip surface.
  2. M6 thread (×4) for safety strap screw and other accessories/adaptations.
  3. Countersunk profile for fingers, for better grip when lifting the transmitter.
  4. Super magnets (×3).
  5. Square design makes it easy to position in a corner of an object, it also clearly indicates tilting angles and simplifies calibration.
  6. Clear TFT colour display.
    On/Off, Change display view.

A complete system contains

Manuals

XT Series Manual (pdf)

Product information

XT20/XT22 Laser transmitters
Product Catalogue rev. 24
Product Overview

For software, see Support > Software download.

XT660 - Shaft alignment

With Easy-Laser® XT660 you can deal with all the important steps of machine setup and maintenance.

XT770 - Shaft alignment

With Easy-Laser® XT770 you can perform shaft alignment of horizontal and vertically/flange mounted machines, but also align machine trains, measure twist of foundation, and more.

Wind - Shaft alignment

Shaft alignment systems specially developed for alignment of wind turbines. 

XT770 Shaft+GEO - Shaft alignment and geo applications

With Easy-Laser® XT770 Shaft+GEO you can perform shaft alignment of horizontal and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure strainghtness, flatness, twist of foundation, and more.

XT550 - Ex/ATEX Shaft alignment

Easy-Laser® XT550 is an intrinsically safe shaft alignment system, developed for use in potentially hazardous areas.

XT440 - Shaft alignment

Easy-Laser® XT440 is our most basic, app based system. Lets you perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines.